Specifications
Description
The B2-LR-II by Really Right Stuff was designed to provide a sturdy interface between your camera/lens and tripod. Attaching your camera/lens to a typical ¼”-20 screw is not only tedious and insecure, but also allows the camera/lens to freely rotate with nothing preventing it from coming loose. The B2-LR-IIsolves this problem with a 2-part system: a quick release clamp and a quick release plate. The clamp jaws open and close in one of two ways: by rotating a knurled knob on the screw-knob clamps, or by flipping a single level on the level release clamps. In addition, the B2-LR-II features dual mounts: a center socket is countersunk on top but also threaded 3/8"-16. Mount by spinning onto an exposed threaded 3/8" post or with flat head screw from above (accept M6 or 1/4"-20, not 3/8"). These clamps are appropriate for mounting on: any head or platform with exposed 3/8"-16 threaded post can drop onto a female socket tapped 1/4"-20 (for any RRS head) or metric 6 (for all others; all screws sold separately), any head or platform with exposed 1/4"-20 threaded post - install a reducer bushing into the socket hole of the clamp, any head or platform with 3/8"-16 female socket